A.) COMPACT CAR - Any factory stock American or foreign auto with 105-inch or less wheel base. Four cylinder engines only.
B.) FULL SIZE CAR - Any factory stock American made auto or station wagon is permitted. No Chrysler Imperials
C.) 6 CYLINDER – Must be 1087 inch wheel base or less. All other car rules apply.
No Jeeps, SUV'S, trucks or 4-wheel drive vehicles will be permitted to enter.
No "Checkered Cabs" or other specialty vehicles.
· All drivers are required to wear an approved safety helmet. Full face helmets are recommended. Safety belts are required and Must be worn until the heat is completed. (Factory installed shoulder straps are recommended), Drivers must stay in their cars with helmet and belts on until the event is over. Car and Driver will be disqualified for the evening if the driver unhooks seat belts or removes the helmet during the event while under green.
· All dirt, glass and loose parts must be removed from the car. Do Not break the glass in the doors.
· All glass including head and tail lights and side markers must be removed prior to coming to the track. The windshield must be removed. No lights, sirens or other noise making devices may be in or on the car. Nothing over 4 inches may be mounted over roof or trunk or hood.
· All chrome molding, rear seat, sun visors, rear view mirrors and head liners must be removed along with carpet and padding.
· All exterior plastic including the grill and the factory nose piece must be removed.
· The stock gas tank must be removed.
· A maximum of 3 gallons of gasoline (NO ALCOHOL) will be allowed. A 5 gallon metal (approved) gas tank must be securely fastened in the area vacated by the rear seat. An approved plastic marine tank will be permitted. The tank must have a fuel line type fitting. No rubber tie down straps will be permitted.
· No modification or reinforcement will be permitted to the car body, frame or suspension:
EXCEPTIONS
a. Optional bar behind the driver seat from door post to door post no higher than ¾ up the back of the seat. Maximum bar diameter is 3 inches and must be welded into place.
b. Car bumpers only on cars and Pick up bumpers only on the pickups. Bumper shocks may be welded, as may the bumper bracket, however they must be in the stock location with no reinforcements, plates or gussets. Chains or cables are not permitted around the bumpers.
c. Large cars bumper height between 18 & 22 inches top front and rear bumper.
· Inner driver door padding is required.
· No bumper or frame mounted hitches will be permitted.
· A working, hydraulic operated brake, system is mandatory.
· Hood, trunk and station wagon inner decks must be visible for inspection.
· Hood and trunk must be secured after inspection. (A maximum of places on the hood and four on the trunk). A minimum 1/4 inch chair or cable (no dog type chain), and a maximum 3/8 inch chain or cable. No Xing of chains or cable on the trunk or hood. No ready rod to frame connections, Hood pins are permitted through the body only, with a maximum 3/4 inch diameter and must not stick up more than 1 1/2 inches above the hood.
· The driver is permitted four - 4 X 4 plates, 1/4 inch thick maximum on the doors, trunk lid or tailgate.
· There must be a hole in the hood that measures 12 inches in diameter above the carburetor.
· All doors must be fastened shut by a horizontal solid steel strap, chains or cables. Chains or cables must be a minimum 1/4 inches diameter with a maximum of 3/8 inch. Solid welding of doors or tailgates will not be allowed.
· No forward facing exhaust. Any engine in the car must be in stock location. The 4-cylinder class must be 4-cylinder.
· The battery must be securely fastened to the front passenger door board. Rubber tie down straps are not permitted. The top of the battery must be covered with a secured rubber mat.
· All cooling systems must be original equipment or less and must be located in the engine compartment under the hood. No cooling systems fluids (motor oil, transmission or water) are permitted in the driver's compartment. No auxiliary tanks are permitted. Electric fans are permitted but steel fan blades are not permitted.
· All air conditioning systems must be drained and rubber hoses removed prior to arrival at track.
· ALL CARS must have 18 inch high numbers clearly painted on the roof, and each door. Questionable language will not be permitted on cars. The Track Officials decision is final.
· Anyone found striking the door of another car will result in disqualification.
· Any car that does notmove or strike a LIVE car within I minute will be disqualified. Officials will shut down any car which is deemed a safety risk, (excessive smoking or throwing debris from spinning tires).
· Heat winners may run a car which has been in the current derby. Car and/or driver can only qualify once unless the car has been disqualified for the evening.
· A 5 MPH speed limit must be maintained at all times in the pit area, parking lot and driveways.
· Passengers are not permitted to ride on or in the demolition derby cars at any time. This includes pit areas, parking lots, and driveways.
· Drivers, Officialsand Towing Personnel are the only people permitted on the track.
· Only 4 ply passenger or 6 ply LTtires, DOT approved may be used, except pickups may be up to 10 ply. with only one tire per wheel. Studs are not permitted and no split rims. Wheel weights must be removed. Air only in the tires, No Split Rims.
· No Alcoholic beverages or intoxicated people are permitted in the Pits. Alcohol will be confiscated and intoxicated parties ejected and possibly arrested.
· A current drivers' license must be presented by all drivers at registration.
· Children under the age of 12 will not be permitted to enter the pit area Children 12 and over WILL NOT be permitted into the pit area WITHOUT parental supervision "AND" the signed Release and Waiver of Liability and Indemnity Agreement.
· All demolition derby cars must be removed from the racetrack within one hour after competition has ended and from the fairgrounds by 1:00 a.m.
· All persons in the pit areas must display the official wristband or stamp for the event or they will be asked to leave the pit area.
· All drivers must wear eye protection in the form of goggles or a face shield. Regular eye glasses will not meet this requirement.
· Tailgatesmust be removed and chains or cables used with a minimum of 1/4 inch in four spots through the bed and around the frame in addition to stock bolts.
· Fuel tanks should be in the bed located in the front center of the bed.
· No lift kits, suspension lift kits or modifications of any kind. Maximum bumper height top 29 inches.
· NO excessive body bending especially in the trunk area.
· Officials Reserve The Right To Lift the Car For Inspection
